Transfer Case Four Wheel Drive Actuator Lever Shaft Bearing Replacement - Front. Chevrolet Tahoe

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2009 🢒 Tahoe - 2WD 🢒 Transmission 🢒 Transfer Case - MP 3023/3024-NQH 🢒 Transfer Case Four Wheel Drive Actuator Lever Shaft Bearing Replacement - Front

Callout

Component Name

Preliminary Procedure

Ensure the bearing is installed squarely into the bearing bore.

Transfer Case Four Wheel Drive Actuator Lever Shaft Bearing Assembly

Tip

•	Ensure the printing on the bearing is facing upward.

•	A suitable adapter is required to use with the J 8092 driver .

•	Press the bearing until the bearing bottoms on the front case half.

Special Tools

•	J 2619-01 Slide Hammer

•	J 8092 Universal Driver

•	J 44737 Shift Rail Bearing Remover

For equivalent regional tools, refer to Special Tools.