Back Body Opening Upper Applique Replacement. Chevrolet Tahoe

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2009 🢒 Tahoe - 2WD 🢒 Body Hardware and Trim 🢒 Exterior Trim 🢒 Back Body Opening Upper Applique Replacement

Callout

Component Name

Warning: When a lift gate hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury.

Rear Applique Screw (Qty: 3)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
2 N·m (18 lb in)

Tip

•	Position the center screw to the applique first, followed by the hinge nuts second.

•	Install the outer screws last and torque the screws in the same sequence.

Rear Applique Nut (Qty: 2)

Tighten
9 N·m (80 lb in)

Tip
Disconnect the electrical connector.

Rear Applique