Preliminary Procedure

Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.

1

Rear Upper Stabilizer Shaft Link Nut

Caution: Refer to Fastener Caution in the Preface section.

Tighten
65 N·m (48 lb ft) plus 40 degrees

2

Rear Upper Stabilizer Shaft Link Bolt

3

Rear Lower Stabilizer Shaft Nut (Qty: 2)

Procedure

1. Use an Allen wrench to keep the lower stabilizer shaft ball stud from rotating while removing the outer nut.
2. When installing the inner stabilizer shaft link nut, ensure that it is tighten securely against the ball joint.

Tighten
65 N·m (48 lb ft) plus 40 degrees

4

Rear Stabilizer Shaft