Step | Action | Value(s) | Yes | No | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1 | Was the Hydraulic Brake Diagnosis System Check performed? | -- | ||||||||||||||||
2 | Inspect the disc brake rotors for the following conditions:
Refer to the following procedures:
Do any of the above conditions apply? | -- | ||||||||||||||||
3 |
Important: If refinishing the brake rotor results in a thickness that is less than the thinnest (Refinishing) thickness, replace the rotor. Refer to Front Brake Rotor Replacement or Rear Brake Rotor Replacement in Disc Brakes. Is the repair complete? | -- | -- | |||||||||||||||
4 | Inspect the following brake caliper assembly components for corrosion:
Refer to Brake Caliper Inspection in Disc Brakes. Are any of the above components corroded or sticking? | -- | ||||||||||||||||
5 | Repair or replace calipers. Refer to the appropriate procedure:
Is the repair complete? | -- | -- | |||||||||||||||
6 | Inspect the disc brake pads and brake shoe linings for the following conditions:
Do any of the above conditions apply? | -- | ||||||||||||||||
7 | Replace the brake linings. Refer to the appropriate procedure:
Is the repair complete? | -- | -- | |||||||||||||||
8 | Inspect the brake assembly for loose, missing or broken components. Are there missing or loose brake assembly components? | -- | ||||||||||||||||
9 | Tighten or replace loose or missing brake assembly components. Is the repair complete? | -- | -- | |||||||||||||||
10 | Inspect the hydraulic brake system for leaks. Refer to Brake Fluid Leak . Are there brake fluid leaks? | -- | ||||||||||||||||
11 |
Has the leak returned? | -- | ||||||||||||||||
12 | Replace the brake hose or pipe as necessary. Is the repair complete? | -- | -- | |||||||||||||||
13 | Inspect the brake caliper piston seal for leaks. Refer to Brake Caliper Inspection . Is the brake caliper piston seal leaking? | -- | ||||||||||||||||
14 | Replace the brake caliper piston seal. Refer to the appropriate procedure:
Is the repair complete? | -- | -- | |||||||||||||||
15 | Inspect the park brake cable. Refer to Park Brake Cable Inspection in Park Brake. Is the park brake cable improperly adjusted? | -- | ||||||||||||||||
16 | Replace the park brake cable. Refer to the appropriate procedure:
Is the repair complete? | -- | -- | |||||||||||||||
17 | Inspect for an internal leak within the master cylinder. Refer to Master Cylinder Diagnosis . Is there an internal leak within the master cylinder? | -- | ||||||||||||||||
18 | Overhaul or replace the master cylinder. Refer to Master Cylinder Overhaul or Master Cylinder Replacement in Hydraulic Brakes. Is the repair complete? | -- | -- | |||||||||||||||
19 | Inspect for contaminated or improper brake fluid. Is the brake fluid contaminated or improper? | -- | ||||||||||||||||
20 | Flush the brake system. Refer to Hydraulic Brake System Flushing . Is the repair complete? | -- | -- | |||||||||||||||
21 | Inspect the brake pipes and hoses for a restricted brake fluid passage. Inspect for the following conditions:
Refer to Antilock Brake System Automated Bleed Procedure . Is there a restricted brake fluid passage? | -- | ||||||||||||||||
22 |
Is the repair complete? | -- | -- | |||||||||||||||
23 | Inspect for air in the brake system. Refer to Antilock Brake System Automated Bleed Procedure . Is there air in the brake system? | -- | ||||||||||||||||
24 | Bleed the brake system. Refer to Antilock Brake System Automated Bleed Procedure . Is the repair complete? | -- | -- | |||||||||||||||
25 | Verify proper brake system operation. Does the brake system operate properly? | -- | System OK |
