GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2000 🢒 Tahoe - 4WD 🢒 Transmission/Transaxle 🢒 Automatic Transmission - 4L60-E 🢒 Valve Body

Removal Procedure
  1. Remove the oil pan, gasket, and filter. Refer to Automatic Transmission Fluid and Filter Replacement .

    2. Object Number: 5443 Size: SH
  2. Disconnect the electrical connectors from the control valve body components.

    3. Object Number: 29454 Size: SH
  3. Remove the bolts securing the pressure switch to the control valve body.

    4. Object Number: 409065 Size: SH
  4. Remove the torque converter clutch solenoid bolts.

    5. Object Number: 409129 Size: SH
  5. Remove the retainer clip (379), torque converter clutch solenoid (396), and the O-ring.
  6. Remove the wiring harness bolts and let the wiring harness hang.

    7. Object Number: 13895 Size: SH
  7. Remove the manual shift detent spring bolt.
  8. Remove the manual shift detent spring assembly.
  9. Remove the remaining control valve body bolts.

    10. Object Number: 29460 Size: SH
  10. Remove the manual valve link and the control valve body from the transmission case.
  11. Remove the accumulator, spacer plate, and gaskets. Refer to Accumulator Assembly, Spacer Plate, and Gaskets .

Disassembly Procedure

    Object Number: 473252 Size: SH
  1. Remove the solenoid retainer (4) and the 1-2 shift solenoid (1).
  2. Remove the 1-2 shift valve (2) and the 1-2 shift valve spring (3).

    3. Object Number: 473254 Size: SH
  3. Remove the solenoid retainer (4) and the 2-3 shift solenoid (1).
  4. Remove the 2-3 shuttle valve (2) and the 2-3 shift valve (3).

    5. Object Number: 473257 Size: SH
  5. Remove the coiled spring pin (1).
  6. Remove the 1-2 accumulator valve sleeve (2).
  7. Remove the 1-2 accumulator valve (3) and the 1-2 accumulator valve spring (4).

    8. Object Number: 473263 Size: SH
  8. Remove the solenoid retainer bolt (7) and the solenoid retainer (6). Remove the pressure control solenoid (1).
  9. Compress the actuator feed limit valve spring (3).
  10. Remove the bore plug retainer (2) and release the spring slowly.
  11. Remove the bore plug (5).
  12. Remove the actuator feed limit valve spring (3) and the actuator feed limit valve (4).

    13. Object Number: 473266 Size: SH
  13. Remove the solenoid retainer (4) and the 3-2 control solenoid (1).
  14. Remove the 3-2 control valve (2) and the 3-2 control valve spring (3).

    15. Object Number: 473267 Size: SH
  15. Remove the bore plug retainer (1) and the bore plug (8).
  16. Remove the 3-2 downshift valve spring (2) and the 3-2 downshift valve (3).
  17. Remove the coiled spring pin (4) and the bore plug (7).
  18. Remove the reverse abuse valve spring (5) and the reverse abuse valve (6).

    19. Object Number: 473270 Size: SH
  19. Remove the bore plug retainer (1) and the bore plug (4).
  20. Remove the 3-4 shift valve spring (2) and the 3-4 shift valve (3).

    21. Object Number: 473275 Size: SH
  21. Remove the bore plug retainer (1) and the bore plug (5).
  22. Remove the 3-4 relay valve (2) and the 4-3 sequence valve (3) and the 4-3 sequence valve spring (4).

    23. Object Number: 473272 Size: SH
  23. Remove the bore plug retainer (1) and the bore plug (5).
  24. Remove the regulator apply valve (4) and the regulator apply spring (3) and the isolator valve (2).

Assembly Procedure

    Object Number: 473272 Size: SH
  1. Install the following items:
    2. 1.1. The isolator valve (2)
    1.2. The regulator apply spring (3)
    1.3. The regulator apply valve (4)
    1.4. The bore plug (5)
    1.5. The bore plug retainer (1)

    Object Number: 473275 Size: SH

    Important: Lubricate all parts with Dexron®-VI automatic transmission fluid before installation.

  2. Install the following items:
    3. 2.1. The 4-3 sequence valve spring (4)
    2.2. The 4-3 sequence valve (3)
    2.3. The 3-4 relay valve (2)
    2.4. The bore plug (5)
    2.5. The bore plug retainer (1)

    Object Number: 473270 Size: SH
  3. Install the following items:
    4. 3.1. The 3-4 shift valve (3)
    3.2. The 3-4 shift valve spring (2)
    3.3. The bore plug (4)
    3.4. The bore plug retainer (1)

    Object Number: 473267 Size: SH
  4. Install the following items:
    5. 4.1. The reverse abuse valve (6)
    4.2. The reverse abuse valve spring (5)
    4.3. The bore plug (7)
    4.4. The coiled spring pin (4)
    4.5. The 3-2 downshift valve (3)
    4.6. The 3-2 downshift valve spring (2)
    4.7. The bore plug (8)
    4.8. The bore plug retainer (1)

    Object Number: 473266 Size: SH
  5. Install the following items:
    6. 5.1. The 3-2 control valve spring (3)
    5.2. The 3-2 control valve (2)
    5.3. The 3-2 control solenoid (1)
    5.4. The solenoid retainer (4)

    Object Number: 473263 Size: SH
  6. Install the following items:
    7. 6.1. The actuator feed limit valve (4)
    6.2. The actuator feed limit valve spring (3)
    6.3. The bore plug (5)
    6.4. The bore plug retainer (2)
    6.5. The pressure control solenoid (1)
    6.6. The solenoid retainer (6)
    6.7. The solenoid retainer bolt (7)

    Object Number: 473257 Size: SH
  7. Install the following items:
    8. 7.1. The 1-2 accumulator valve spring (4)
    7.2. The 1-2 accumulator valve (3) in the 1-2 accumulator valve sleeve (2)
    7.3. The 1-2 accumulator valve and sleeve assembly
    7.4. The coiled spring pin (1)

    Object Number: 473254 Size: SH
  8. Install the following items:
    9. 8.1. The 2-3 shift valve (3)
    8.2. The 2-3 shuttle valve (2)
    8.3. The 2-3 shift solenoid valve (1)
    8.4. The solenoid retainer (4)

    Object Number: 473252 Size: SH
  9. Install the following items:
    10. 9.1. The 1-2 shift valve spring (3)
    9.2. The 1-2 shift valve (2)
    9.3. The 1-2 shift solenoid valve (1)
    9.4. The solenoid valve retainer (4)

    Object Number: 473247 Size: SH
  10. Install the following items:
    11. 10.1. The forward abuse valve (5)
    10.2. The forward abuse valve spring (6)
    10.3. The bore plug (8)
    10.4. The coiled spring pin (7)
    10.5. The low overrun valve (9)
    10.6. The low overrun valve spring (10)
  11. Install the following items:
    12. 11.1. The forward accumulator oil seal (4) on the forward accumulator piston (3)
    11.2. The forward accumulator pin (2)
    11.3. The forward accumulator piston (3)
    11.4. The forward accumulator spring (1)
    11.5. The forward accumulator cover (12)
    11.6. The forward accumulator cover bolts (11)

    Object Number: 473246 Size: SH
  12. Install the manual valve (1).

Installation Procedure
  1. Install the accumulator, spacer plate, and gaskets. Refer to Accumulator Assembly, Spacer Plate, and Gaskets .

    2. Object Number: 29460 Size: SH
  2. Install the manual valve link and the control valve body to the transmission case.

    3. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 7748 Size: SH
  3. Install the remaining control valve body bolts.

    4. Tighten
    Tighten the bolts to 11 N·m (8 lb ft).

  4. Install the manual shift detent spring assembly.
  5. Install the manual shift detent spring bolt.

    6. Object Number: 409129 Size: SH
  6. Install the O-ring, torque converter clutch solenoid, and retainer clip.
  7. Install the wiring harness and bolts.

    8. Tighten
    Tighten the bolts to 11 N·m (8 lb ft).


    Object Number: 409065 Size: SH
  8. Install the torque converter clutch solenoid bolts.

    9. Tighten
    Tighten the bolts to 11 N·m (8 lb ft).


    Object Number: 29454 Size: SH
  9. Install the bolts securing the pressure switch to the control valve body.

    10. Tighten
    Tighten the bolts to 11 N·m (8 lb ft).

  10. Connect the electrical connectors to the control valve body components. Refer to

    External Components
    Object Number: 310227 Size: LF
    (1)Harness Connector
    (2)Vehicle Speed Sensor
    (3)Crossmember
    (4)Heated Oxygen Sensor Bank 1 Sensor 2 Connector
    (5)Backup Lamp Switch Connector (Part of the Park / Neutral Position Switch)
    (6)Park / Neutral Position Switch Connector
    (7)Park / Neutral Position Switch
    (8)Heated Oxygen Sensor Bank 1 Sensor 1 Connector
    .
  11. Install the filter, gasket, and oil pan . Refer to Automatic Transmission Fluid and Filter Replacement .

    12. Important: It is recommended that the transmission adaptive pressure (TAP) information be reset.

    Resetting the TAP values using a scan tool will erase all learned values in all cells. As a result, the ECM, PCM or TCM will need to relearn the TAP values. Transmission performance may be affected as new TAP values are learned,

  12. Reset the TAP values. Refer to Adapt Function .