Did you perform the Instrument Cluster Diagnostic System Check?

--

Go to Step 2

Go to Diagnostic System Check - Instrument Cluster

Verify the fault is present.

Does the system operate normally?

--

Go to Testing for Intermittent Conditions and Poor Connections

Go to Step 3

1. Turn ON the ignition with the engine OFF.
2. With a scan tool select Instrument Panel Cluster, Special Functions, and Lamp Test.
3. Command the Low Fuel message ON.

Does the Low Fuel message turn ON and OFF when commanded?

--

Go to Fuel Gage Inaccurate or Inoperative

Go to Step 4

Replace the instrument cluster. Refer to Instrument Cluster Replacement

Did you complete the replacement?

--

Go to Step 5

--

Operate the system in order to verify the repair.

Did you correct the condition?

--

System OK

Go to Step 3