Tools Required

J 42738 Seal Installer

1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
2. Remove the transfer case assembly. Refer to Transfer Case Assembly Replacement .
3. Remove the transfer case input shaft seal.

Important: When installing the input shaft seal, make sure that the part numbers on the seal are facing outward (toward the technician).

1. Align the transfer case input shaft seal evenly on the input shaft.

Important: The input shaft seal should be even with the surface of the transfer case after installation.

2. Using theJ 42738 , install the transfer case input shaft seal.
3. Install the transfer case assembly. Refer to Transfer Case Assembly Replacement .
4. Check the transfer case fluid level. Refer to Transfer Case Fluid Replacement .
5. Lower the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.