Application
| Specification
|
Metric
| English
|
Front Brakes JC5/JH5
|
- Rotor Discard Thickness *
| 27.50 mm
| 1.083 in
|
- Rotor Minimum Allowable Thickness After Refinish
| 28.0 mm
| 1.102 in
|
|
| 29.0 mm
| 1.142 in
|
- Rotor Maximum Allowable Lateral Runout
| 0.13 mm
| 0.005 in
|
- Rotor Maximum Allowable Scoring
| 1.50 mm
| 0.059 in
|
- Rotor Maximum Allowable Thickness Variation
| 0.025 mm
| 0.0001 in
|
Front Brakes JH6
|
- Rotor Discard Thickness *
| 36.50 mm
| 1.437 in
|
- Rotor Minimum Allowable Thickness After Refinish
| 37.0 mm
| 1.457 in
|
|
| 38.0 mm
| 1.496 in
|
- Rotor Maximum Allowable Lateral Runout
| 0.13 mm
| 0.005 in
|
- Rotor Maximum Allowable Scoring
| 1.50 mm
| 0.059 in
|
- Rotor Maximum Allowable Thickness Variation
| 0.025 mm
| 0.001 in
|
Front Brakes JH7
|
- Rotor Discard Thickness *
| 36.50 mm
| 1.437 in
|
- Rotor Minimum Allowable Thickness After Refinish
| 37.0 mm
| 1.46 in
|
|
| 38.0 mm
| 1.50 in
|
- Rotor Maximum Allowable Lateral Runout
| 0.13 mm
| 0.005 in
|
- Rotor Maximum Allowable Scoring
| 1.50 mm
| 0.059 in
|
- Rotor Maximum Allowable Thickness Variation
| 0.025 mm
| 0.001 in
|
Rear Brakes JC5/JH5 Pickup
|
- Rotor Discard Thickness *
| 18.50 mm
| 0.728 in
|
- Rotor Minimum Allowable Thickness After Refinish
| 19.0 mm
| 0.748 in
|
|
| 20.0 mm
| 0.787 in
|
- Rotor Maximum Allowable Lateral Runout
| 0.13 mm
| 0.005 in
|
- Rotor Maximum Allowable Scoring
| 1.50 mm
| 0.059 in
|
- Rotor Maximum Allowable Thickness Variation
| 0.025 mm
| 0.001 in
|
Rear Brakes JC5/JH5 Utility
|
- Rotor Discard Thickness *
| 28.50 mm
| 1.122 in
|
- Rotor Minimum Allowable Thickness After Refinish
| 29.0 mm
| 1.142 in
|
|
| 30.0 mm
| 1.181 in
|
- Rotor Maximum Allowable Lateral Runout
| 0.13 mm
| 0.005 in
|
- Rotor Maximum Allowable Scoring
| 1.50 mm
| 0.059 in
|
- Rotor Maximum Allowable Thickness Variation
| 0.025 mm
| 0.001 in
|
Rear Brakes JH6
|
- Rotor Discard Thickness *
| 27.50 mm
| 1.083 in
|
- Rotor Minimum Allowable Thickness After Refinish
| 28.0 mm
| 1.102 in
|
|
| 29.0 mm
| 1.142 in
|
- Rotor Maximum Allowable Lateral Runout
| 0.13 mm
| 0.005 in
|
- Rotor Maximum Allowable Scoring
| 1.50 mm
| 0.059 in
|
- Rotor Maximum Allowable Thickness Variation
| 0.025 mm
| 0.001in
|
Rear Brakes JH7
|
- Rotor Discard Thickness *
| 28.5 mm
| 1.122 in
|
- Rotor Minimum Allowable Thickness After Refinish
| 29.0 mm
| 1.142 in
|
|
| 30.0 mm
| 1.181 in
|
- Rotor Maximum Allowable Lateral Runout
| 0.13 mm
| 0.005 in
|
- Rotor Maximum Allowable Scoring
| 1.50 mm
| 0.059 in
|
- Rotor Maximum Allowable Thickness Variation
| 0.025 mm
| 0.001 in
|
* All brake rotors have a discard dimension cast into them. Replace any rotor
that does not meet this specification. After refinishing the rotor, replace any
rotor that does not meet the minimum thickness specifications.
|
