GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2003 🢒 Tahoe - 4WD 🢒 Body and Accessories 🢒 Bumpers 🢒 Front Bumper Fascia Molding Cap Replacement

Removal Procedure
  1. Open the hood.
  2. Remove the upper air baffle. Refer to Radiator Air Upper Baffle and Deflector Replacement .
  3. Remove the front grille. Refer to Grille Replacement .
  4. Remove the front bumper. Refer to Front Bumper Replacement .

    5. Object Number: 1326844 Size: SH
  5. Remove the front bumper fascia cap by depressing all the tabs and pulling up.

Installation Procedure
  1. Position the fascia cap tabs to the slots in the bumper.
  2. Install the front bumper cap to the bumper pressing into place until fully seated.

    3. Object Number: 1326845 Size: SH
  3. Install the front bumper. Refer to Front Bumper Replacement .
  4. Install the front grille. Refer to Grille Replacement .
  5. Install the upper air baffle. Refer to Radiator Air Upper Baffle and Deflector Replacement .
  6. Close the hood.