Removal Procedure
- Remove the negative battery cable. Refer to
Battery Negative Cable Replacement .
- Mark the location of the battery current sensor on the battery cable with
tape for reference during installation.
- Remove the tape securing the battery current sensor to the negative battery
cable.
- Mark the location of the negative battery cable clips (1) and remove the
clips from the cable.
- Squeeze the negative battery cable branches together.
Important: Note the orientation of the battery
current sensor prior to removal.
- Slide the battery current sensor (2) off of the negative battery cable.
Installation Procedure
- Squeeze the negative battery cable branches together.
Important: Ensure the battery current sensor is
installed in the correct direction and location on the negative battery cable.
- Slide the NEW battery current sensor (2) up onto the negative battery cable
to the location previously marked during removal.
- Wrap electrical tape around the battery current sensor leg in order to
secure the sensor to the negative battery cable.
- Install the negative battery cable clips (1) to the cable to the locations
previously marked during removal.
- Install the negative battery cable. Refer to
Battery Negative Cable Replacement
.