Exhaust Muffler Insulator, Hanger, and Bracket Replacement 1500 - LMG/LY2/LY5

Removal Procedure

Caution: Refer to Exhaust Service Caution in the Preface section.

Caution: Refer to Protective Goggles and Glove Caution in the Preface section.

Important: 

•	Do not use oil base lubricants.

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Spray lubricant if necessary, onto the exhaust system insulator holes where the frame hanger and the exhaust hanger are inserted.
3. Remove the exhaust system insulator (1 or 3), as required.
4. If replacing the exhaust system insulator (2 or 4), remove the exhaust muffler assembly. Refer to Muffler Replacement .
5. Spray lubricant if necessary, onto the exhaust system insulator hole where the frame hanger is inserted.
6. Remove the exhaust system insulator (2 or 4) from the frame hanger, as required.

Installation Procedure

1. Spray lubricant if necessary, onto the exhaust system insulator hole where the frame hanger will be inserted.
2. Install the exhaust system insulator (2 or 4) to the frame hanger, as required.
3. If the exhaust system insulator (2 or 4) was replaced, install the exhaust muffler assembly. Refer to Muffler Replacement .
4. Spray lubricant if necessary, onto the exhaust system insulator holes where the frame hanger and the exhaust hanger will be inserted.
5. Install the exhaust system insulator (1 or 3), as required.
6. Lower the vehicle.

Exhaust Muffler Insulator, Hanger, and Bracket Replacement 1500 - LC9/LMG/LY5/L76

Removal Procedure

Caution: Refer to Exhaust Service Caution in the Preface section.

Caution: Refer to Protective Goggles and Glove Caution in the Preface section.

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .

Important: Service the exhaust hangers individually in order to retain the support of the exhaust system.





Important: Do not use oil base lubricants.

2. Apply a soapy solution to the following in order to ease the removal of the hanger (1):

•	The frame support bracket rod (2)

•	The exhaust pipe hanger rod (3)

3. Pry the exhaust pipe hanger (1) free from the following:

•	The frame support bracket rod (2)

•	The exhaust pipe hanger rod (3)

Installation Procedure

Important: Do not use oil base lubricants.

1. Apply a soapy solution to the following in order to ease the installation of the hanger (1):

•	The frame support bracket rod (2)

•	The inner diameter of the exhaust pipe hanger (1)

•	The exhaust pipe hanger rod (3)

2. Press the exhaust pipe hanger (1) over the following:

•	The frame support bracket rod (2)

•	The exhaust pipe hanger rod (3)

3. Lower the vehicle.

Exhaust Muffler Insulator, Hanger, and Bracket Replacement 1500 - L92

Removal Procedure

Caution: Refer to Exhaust Service Caution in the Preface section.

Important:  Do not use oil based lubricants.

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Spray lubricant onto the exhaust system insulators where the insulators are installed into the frame hangers for ease of removal.
3. Remove the exhaust pipe insulators (1 and 2).
4. If replacing the exhaust muffler insulators also (3 and 4) , support the exhaust system with an adjustable jack to in order to retain exhaust positioning.
5. Remove the exhaust system insulators (3 and 4) from the frame hangers.

Installation Procedure

1. Spray lubricant onto the frame hangers where the insulators will be installed.
2. Install the exhaust pipe insulators (1 and 2) to the frame hangers and the exhaust pipe.
3. Install the exhaust muffler insulators (3 and 4) to the frame hangers and the muffler pipe and remove the adjustable jack stand.
4. Inspect for proper positioning and clearance of the exhaust system.

Exhaust Muffler Insulator, Hanger, and Bracket Replacement 2500

Removal Procedure

Caution: Refer to Exhaust Service Caution in the Preface section.

Caution: Refer to Protective Goggles and Glove Caution in the Preface section.

Important: 

•	Do not use oil base lubricants.

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Spray lubricant if necessary, onto the exhaust system insulator holes where the frame hanger and the exhaust hanger are inserted.
3. Remove the exhaust system insulator (1), as required.
4. If replacing the exhaust system insulator (2), remove the exhaust muffler assembly. Refer to Muffler Replacement .
5. Spray lubricant if necessary, onto the exhaust system insulator hole where the frame hanger is inserted.
6. Remove the exhaust system insulator (2) from the frame hanger, as required.

Installation Procedure

1. Spray lubricant if necessary, onto the exhaust system insulator hole where the frame hanger will be inserted.
2. Install the exhaust system insulator (2) to the frame hanger, as required.
3. If the exhaust system insulator (2) was replaced, install the exhaust muffler assembly. Refer to Muffler Replacement .
4. Spray lubricant if necessary, onto the exhaust system insulator holes where the frame hanger and the exhaust hanger will be inserted.
5. Install the exhaust system insulator (1), as required.
6. Lower the vehicle.

Exhaust Muffler Insulator, Hanger, and Bracket Replacement LFA

Removal Procedure

Caution: Refer to Exhaust Service Caution in the Preface section.

Caution: Refer to Protective Goggles and Glove Caution in the Preface section.

Important: 

•	Do not use oil base lubricants.

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Spray lubricant if necessary, onto the exhaust system insulator holes where the frame hanger and the exhaust hanger are inserted.
3. Remove the exhaust system insulator (1, 2 or 3), as required.

Installation Procedure

1. Spray lubricant if necessary, onto the exhaust system insulator hole where the frame hanger will be inserted.
2. Install the exhaust system insulator (1, 2 or 3) to the frame hanger, as required.
3. Lower the vehicle.