Callout
| Component Name
|
Caution: When a lift gate hold open device is being removed or installed, provide
alternate support to avoid the possibility of damage to the vehicle or personal
injury.
Preliminary Procedure
- Disconnect the liftgate window support struts. Refer to
Liftgate Strut Replacement
.
- Remove the center high mounted stop lamp applique. Refer to
Back Body Opening Upper Applique Replacement
.
- Remove the liftgate garnish molding. Refer to
Liftgate Garnish Molding Replacement
.
|
1
| Liftgate Window Hinge E-Ring (Qty: 2)
|
2
| Liftgate Window Hinge Bushing (Qty: 4)
|
3
| Liftgate Window
Procedure
- If the HYBRID decal is damaged or if the liftgate window is being replaced, refer to
Decal or Stripe Replacement
- Disconnect the rear defogger electrical connector.
|