Callout | Component Name |
---|---|
Preliminary Procedures
| |
1 | Assist Step Motor Wedge Bolt Notice: Refer to Fastener Notice in the Preface section. Tighten |
2 | Assist Step Motor Wedge |
3 | Assist Step Motor Bolts (Qty: 3) Tighten |
4 | Assist Step Motor Important: Make sure the flat on the motor is parallel to the floor before installing. All new motors should be shipped with motor flat in the correct position. As the motor is installed shake the board up and down gently to make sure the wedge and flat seat together correctly or unwanted noise could result. Tip |