Notice: In order to avoid actuator damage, DO NOT apply power to the actuator when it is not installed in the HVAC module.

Preliminary Procedure

1. Remove the inflatable restraint instrument panel module. Refer to Inflatable Restraint Instrument Panel Module Replacement .
2. Disconnect the electrical connector from the air temp actuator.

1

Air Temp Actuator Screw (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
1.6 N·m (14 lb in)

2

Air Temp Actuator

Procedure

Re-calibrate the air temp actuator. Refer to Actuator Recalibration .