Callout | Component Name |
---|---|
Caution: Refer to Brake Fluid Irritant Caution in the Preface section. Notice: Refer to Brake Fluid Effects on Paint and Electrical Components Notice in the Preface section. Notice: Always connect or disconnect the wiring harness connector from the EBCM/EBTCM with the ignition switch in the OFF position. Failure to observe this precaution could result in damage to the EBCM/EBTCM. Preliminary Procedures
| |
1 | Master Cylinder Inlet Brake Pipe Fitting (Qty: 2) Notice: Refer to Fastener Notice in the Preface section. Tip Tighten |
2 | Front Wheel Outlet Brake Pipe Fitting (Qty: 2) Tip Tighten |
3 | Rear Wheel Outlet Brake Pipe Fitting (Qty: 2) Tip Tighten |
4 | Brake Pressure Modulator Valve (BPMV) Bracket Bolt (Qty: 3) Tighten |
5 | BPMV Bolt Tighten |
6 | BPMV Bracket ProcedureInspect the BPMV mounting bracket grommet for damage and replace, if necessary. |
7 | BPMV Insulator (Qty: 2) ProcedureInspect the BPMV insulators for damage and replace, if necessary. |
8 | BPMV Assembly Procedure
|