J 29714-A Servo Cover Depressor
• | Cracks |
• | Scoring |
• | Burrs and nicks |
Notice: Refer to Fastener Notice in the Preface section.
Tighten
Tighten the bolt to 11 N·m (97 lb in).
Tighten
Tighten the bolts to 17 N·m (13 lb ft).
Important: It is recommended that transmission adaptive pressure (TAP) information be reset.
Resetting the TAP values using a scan tool will erase all learned values in all cells. As a result, the engine control module (ECM), powertrain control module (PCM) or TCM will need to relearn TAP values. Transmission performance may be affected as new TAP values are learned.