Preliminary Procedures

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Remove the transmission fluid pan. Refer to Automatic Transmission Fluid, Fluid Pan and/or Filter Replacement.
3. Remove the control valve body. Refer to Control Valve Lower Body and Upper Body Replacement.

1

Manual Shift Shaft Pin

Procedure

1. Discard the pin. Replace with NEW pin.
2. "Walk" the pin out using side cutters.

2

Manual Shaft Detent Lever Hub Pin

Procedure

1. Discard the pin. Replace with NEW pin.
2. "Walk" the pin out using side cutters.

3

Manual Shift Shaft

Tip
The manual shaft must be removed to replace the manual shaft seal.

4

Manual Shift Shaft Seal

Procedure

1. Use the J 45201 to remove the seal from the transmission case.
2. Use the DT 47770 to install the seal into the transmission case.

Special Tools