For 1990-2009 cars only
Callout | Component Name | ||||||
|---|---|---|---|---|---|---|---|
|
Notice: After cleaning the transmission components, allow to air dry. Do not use cloth or paper towels in order to dry any transmission components. Lint from the towels can cause component failure. Notice: Do not reuse cleaning solvents. Previously used solvents may deposit sediment which may damage the component. Preliminary Procedures
| |||||||
1 | A/Trans Vent Pipe | ||||||
2 | A/Trans Case Assembly | ||||||
3 | High Voltage Electrical Box | ||||||
4 | Manual Shift Shaft Seal Refer to Manual Shift Shaft Seal Replacement . | ||||||
5 | Torque Dampener Housing Sealing Surface | ||||||
6 | Generator Assembly Sealing Surface | ||||||
7 | A/Trans Fluid Pan Gasket Sealing Surface | ||||||
8 | Rear Case Gasket Surface | ||||||
9 | Generator Assembly Sealing Surface | ||||||
10 | Wiring Harness Passage Sleeve Bore | ||||||
