Rear Window Wiper Blade Replacement. Chevrolet Tahoe

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2008 🢒 Tahoe - 4WD 🢒 Body Hardware and Trim 🢒 Interior Trim and Paneling 🢒 Rear Window Wiper Blade Replacement

Rear Window Wiper Blade Replacement except Avalanche

Callout

Component Name

Rear Arm Cap

Tip
Use a small flat-bladed tool to disengage the cover from the rear wiper arm.

Rear Window Wiper Arm Nut

Notice: Refer to Fastener Notice in the Preface section.

Tip
Hold the wiper arm park finger on the arm securely to inside the channel on the park ramp while tightening the nut.

Tighten
9 N·m (80 lb in)

Rear Window Washer Nozzle Hose Assembly

Tip
Rotate the hose counterclockwise around the end of the rear wiper washer arm upon installation.

Rear Window Wiper Arm Assembly

Tip

•	Use the J 39637 Wiper Arm Remover Tool.

•	Clean the knurls on the rear wiper motor pivot shaft after the rear wiper arm has been removed.

Rear Window Wiper Motor Nut

Tip
Ensure the wiper motor nut is properly tightened prior to the rear wiper arm installation.

Tighten
4.9 N·m (43 lb in)

Rear Window Wiper Motor Spacer