Tools Required

J 43631 Ball Joint Remover

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation.
3. Remove the brake rotor. Refer to Front Brake Rotor Replacement.



4. Use the J 43631 to press the stud from the wheel bearing/hub.

1. Install a new stud. Use washers and a wheel nut and pull the new stud into the hub.
2. Install the brake rotor. Refer to Front Brake Rotor Replacement.
3. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation.
4. Lower the vehicle.