Subject: | EI08183 - 6L50, 6L80, 6L90 RWD Leak from Transmission Oil Pan or Oil Pan Gasket (Engineering Information) |
Models: | 2008-2009 Cadillac CTS, Escalade, Escalade EXT, Escalade ESV, SRX, STS, XLR |
2008-2009 Chevrolet Avalanche, Corvette, Silverado, Suburban, Tahoe |
2008-2009 GMC Sierra, Yukon, Yukon Denali, Yukon XL |
2008-2009 HUMMER H2 |
2008-2009 Pontiac G8 |
with 6L50, 6L80 or 6L90 Automatic Transmission (RPOs MYB, MYC or MYD) |
Attention: | Proceed with this bulletin ONLY if the customer has commented about this concern AND the EI number is listed in GMVIS. If the customer has not commented about this condition or the EI does not show in GMVIS, disregard the bulletin and proceed with diagnostics found in published service information. THIS IS NOT A RECALL - refer to Service Bulletin 04-00-89-053B for more details on the use of Engineering Information bulletins. |
Some customers may comment on a leak from the transmission.
Important: This bulletin ONLY applies to vehicles equipped with Transmissions 6L50, 6L80 or 6L90 (RPOs MYB, MYC, or MYD). For vehicles equipped with transmissions other than these, DO NOT proceed with this bulletin - diagnose and repair according to information found in SI.
If determined through diagnosis that the leak is coming from the transmission oil pan or oil pan gasket, complete the following steps:
Engineer | Phone # |
---|---|
David Juhassz | 586-933-3094 |
Kavoos Kaveh | 734-481-7513 248-255-7782 (cell phone) |
If David or Kavoos are unable to take the call, please leave a message with the following information:
• | Technician Name |
• | Dealership Name and Dealership Phone Number |
• | Complete VIN and Repair Order Number |
Important: If you do not receive a call back within one hour, proceed with repairs to the transmission.
For vehicles repaired under warranty, use:
Labor Operation | Description | Labor Time |
---|---|---|
K9519* | Transmission Oil Leak -- Engineering Information | |
G8 | 0.8 hr | |
CTS, SRX, STS, XLR, Corvette | 1.2 hrs | |
Fullsize Truck/Utilities, H2 | 1.4 hrs | |
* This labor operation number is for bulletin use only. This number will not be published in the Labor Time Guide. |