For 1990-2009 cars only
Removal Procedure
- Remove the engine wiring harness ground bolt.
- Reposition the engine wiring harness ground and ground strap.
- Remove the ground strap nut from the stud at the front of dash.
- Remove the ground strap from the stud.
Installation Procedure
- Install the ground strap to the stud.
- Install the ground strap nut to the stud at the front of dash and tighten to 9 N·m (80 lb in).
- Position the ground strap and engine wiring harness ground.
- Install the engine wiring harness ground bolt and tighten to 16 N·m (12 lb ft).
Caution: Refer to Fastener Caution in the Preface section.
