- Use an appropriate tool
to hold the camshaft timing belt pulley.
- Remove the camshaft timing belt pulley bolt and the camshaft timing
belt pulley.
- Remove the camshaft sensor from the camshaft sensor housing.
- Remove the three camshaft sensor housing bolts and the camshaft
housing from the cylinder head.
- Loosen all valve adjusting
screw lock nuts (2), turn adjusting screws back all the way to allow all rocker
arms to move freely.
- Gradually remove the twelve
camshaft housing bolts in the sequence shown.
- Remove the camshaft and the front camshaft seal.