The Transmission Scan Tool Data List contains all Transmission related parameters that are available on the scan tool. The list is arranged in alphabetical order.
Use the Transmission Scan Tool Data List only after performing the following inspections:
| • | Powertrain On-Board Diagnostic System Check is completed. |
| • | No Diagnostic Trouble Codes (DTCs) are present. |
| • | On-board diagnostics are functioning properly. |
Scan tool values from a properly running Transmission may be used for comparison with the Transmission you are diagnosing. The Transmission Scan Tool Data List represents values that would be seen on a normal running engine.
Important: Do not use a scan tool that displays faulty data. Report the scan tool problem to the manufacturer. Use of a faulty scan tool can result in misdiagnosis and unnecessary parts replacement.
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
Engine Idling/Upper Radiator Hose Hot/Closed Throttle/Transmission in Park or Neutral/Closed Loop | |||
4WD Low | Transmission Data | Enabledor Disabled | Disabled |
Brake Switch | Engine Data | OPEN/CLOSED | RELEASED |
Current Gear | Transmission Data | 1st | 1st |
ECT | Engine Data | C°/F° | 80-90°C / 176-194°F |
Engine Load | Engine Data | % | 10 to 30% |
Engine Speed | Engine Data | RPM | 844 to 900 RPM |
Mode Select Switch | Engine Data | ON/POWER | POWER |
Monitor Shift Sol. 1 | Transmission Data | On/Off | ON |
Monitor Shift Sol. 2 | Transmission Data | On/Off | Off |
Monitor Shift TCC Solenoid | Transmission Data | ON/OFF | OFF |
Overdrive Switch | Transmission Data | ON/OFF | ON |
Shift Solenoid 1 | Transmission Data | On/Off | ON |
Shift Solenoid 2 | Transmission Data | On/Off | Off |
Spark | Engine Data | Degrees | 12-16° |
TCC Solenoid | Transmission Data | ON/OFF | OFF |
Throttle Position Level | Engine Data | 0 | 0 |
Transmission Range | Transmission Data | Park | Park |
Vehicle Speed | Engine Data | km/h/MPH | 0 km/h |
