Did you review the system Descriptions and perform the necessary inspections?

Go to Step 2

Go to Symptoms - Suspension General Diagnosis

Verify that the ride is too hard.

Is the ride too hard?

Go to Step 3

System OK

1. Inspect the vehicle trim height. Refer to Trim Height Inspection .
2. Replace components as necessary.

Did you replace any components?

Go to Step 6

Go to Step 4

Inspect the following components for wear or damage:

Refer to Suspension Strut and Shock Absorber Testing - On Vehicle .

Are any of the components worn or damaged?

Go to Step 5

Go to Step 2

Replace all of the worn or damaged components. Refer to the following procedures:

Did you complete the repair?

Go to Step 6

--

Drive the vehicle in order to verify the repair.

Did you correct the condition?

System OK

Go to Step 2