Removal Procedure
- Remove
the following components from the instrument panel:
1.2. | The IP steering column opening trim plate (1) |
- Release the upper and lower retaining tabs behind the instrument panel
which secure the IP lamp dimmer control (4).
- Slide the dimmer control (4) from the instrument panel
in order to disconnect the electrical connector.
- Disconnect the dimmer control electrical connector.
- Remove the dimmer control (4) from the vehicle.
Installation Procedure
- Connect the IP lamp dimmer control electrical connector.
- Install the dimmer control (4) to instrument panel. Ensure
that the retaining tabs are fully engaged.
- Install
the IP steering column opening trim plate (1) to the instrument panel.
Secure the trim plate with the 3 screws (2).