Removal Procedure
- Remove
the following components from the instrument panel:
1.2. | The IP steering column opening trim plate (1) |
- Release the upper and lower retaining tabs behind the instrument panel
which secure the outside remote control rearview mirror switch (5).
- Slide the rearview mirror switch (5) from the instrument
panel in order to disconnect the electrical connector.
- Disconnect the rearview mirror switch electrical connector.
- Remove the rearview mirror switch (5) from the vehicle.
Installation Procedure
- Connect the outside remote control rearview mirror switch electrical
connector.
- Install the rearview mirror switch (5) to instrument panel.
Ensure that the retaining tabs are fully engaged.
- Install
the IP steering column opening trim plate (1) to the instrument panel.
Secure the trim plate with the 3 screws (2).