DEFINITION: When the pedal assembly is pressed to the floor, the shift lever does not move freely in and out of reverse gear.

Check for any obstruction in the movement of the clutch pedal.

Was there any obstruction found?

Go to Step 2

Go to Step 3

Remove the obstruction.

Does the clutch work properly?

System OK

Go to Step 3

Check the clutch pedal mechanism. Refer to Clutch Pedal Replacement .

Does the clutch work properly?

System OK

Go to Step 4

Check for air in the hydraulic clutch system.

Is there air in the hydraulic clutch system?

Go to Step 5

Go to Step 6

Bleed the hydraulic clutch system. Refer to Hydraulic Clutch Bleeding .

Does the clutch work properly?

System OK

Go to Step 6

Check the master cylinder for worn seals.

Are the seals worn?

Go to Step 7

Go to Step 8

Replace the necessary components. Refer to Clutch Master Cylinder Replacement .

Does the clutch work properly?

System OK

Go to Step 8

Check for a worn or damaged actuator cylinder.

Is the actuator cylinder worn or damaged?

Go to Step 9

Go to Step 10

Replace the actuator cylinder. Refer to Clutch Actuator Cylinder Replacement .

Does the clutch work properly?

System OK

Go to Step 10

Inspect the clutch assembly for the following:

Are the clutch components OK?

--

Go to Step 11

Replace the clutch assembly. Refer to Clutch Assembly Replacement .

Does the clutch work properly?

System OK

--