Step | Action | Yes | No |
|---|---|---|---|
DEFINITION: The ignition lock cylinder will not allow the key to be turned to the LOCK position. | |||
1 | Did you review the Steering Wheel and Column Description and Operation and perform the necessary inspections? | Go to Step 2 | |
2 | Verify that the lock system does not lock. Does the lock system lock? | System OK | Go to Step 3 |
3 | Does the vehicle have an automatic transmission? | Go to Step 4 | Go to Step 6 |
4 | Place the automatic transmission shift lever in Park. Does the lock system lock? | System OK | Go to Step 5 |
5 | Inspect the automatic transmission park lock cable for binding or damage. Is the automatic transmission park lock cable binding or damaged? | Go to Step 7 | Go to Step 6 |
6 | Inspect steering column lock and ignition switch cylinder for damage. Is the steering column lock and ignition switch cylinder damaged? | Go to Step 8 | Go to Step 2 |
7 | Replace the automatic transmission park lock cable. Refer to Shift Lock Control Cable Replacement in Shift Lock Control. Did you complete the repair? | Go to Step 9 | -- |
8 | Replace the steering column lock and ignition switch cylinder. Refer to Steering Column Lock and Ignition Switch Cylinder Replacement . Did you complete the repair? | Go to Step 9 | -- |
9 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 2 |
