For 1990-2009 cars only
Removal Procedure
- Disable the SIR. Refer to SIR Disabling and Enabling .
- Remove the steering wheel from the steering column. Refer to Steering Wheel Replacement in Steering Wheel and Column.
- Remove the IP steering column opening trim plate. Refer to Instrument Panel Trim Panel Replacement - Left Side in Instrument Panel, Gages and Console.
- Remove the 3 screws from the steering column lower cover (2).
- Separate the upper cover and the lower cover, then remove them.
- Disconnect all connectors for the inflatable restraint steering wheel module coil and combination switch assembly.
- Remove the inflatable restraint steering wheel module coil and combination switch assembly.
Important: In the event of deployment, inspect the supplemental inflatable restraint (SIR) coil assembly wire for any signs of scorching, melting or other damage due to excessive heat. If there is damage to the coil assembly, replace the coil assembly.
Installation Procedure
- Install the inflatable restraint steering wheel module coil and combination switch (1) to the steering column.
- Install the inflatable restraint steering wheel module coil and combination switch electrical connectors (3, 4).
- Secure the SIR coil and combination switch wiring harness to the steering column with the retaining bands.
- Install the upper steering column cover and the lower steering column cover to the steering column.
- Secure the steering column covers with the 3 screws (2).
- Install the IP steering column opening trim plate. Refer to Instrument Panel Trim Panel Replacement - Left Side in Instrument Panel, Gages and Console.
- Install the steering wheel to the steering column. Refer to Steering Wheel Replacement in Steering Wheel and Column.
- Enable the SIR. Refer to SIR Disabling and Enabling .
