GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2003 🢒 Tracker - 2WD 🢒 Body and Accessories 🢒 Instrument Panel, Gages, and Console 🢒 Rear Floor Console Replacement

Removal Procedure
  1. Position the front seat assemblies forward in order to gain the necessary clearance to remove the rear floor console screws.
  2. Raise the park brake lever in order to gain the necessary clearance to remove the rear floor console.
  3. Remove the 2 screws which secure the rear floor console and lift the console.
  4. Remove the 12 volt power supply, if equipped. Refer to 12-Volt Accessory Power Receptacle Replacement .
  5. Remove the rear floor console from the vehicle.

Installation Procedure
  1. Install the 12 volt power supply, if equipped. Refer to 12-Volt Accessory Power Receptacle Replacement .
  2. Install the rear floor console to vehicle. Secure the console with the 2 screws.
  3. Lower the park brake lever.
  4. Reposition the front seat assemblies backward and in a upright position.