Removal Procedure
- Remove the front side
door trim panel. Refer to
Front Side Door Trim Panel Replacement
.
- Remove the following components from the front side door (3):
2.2. | The front side door pull handle bracket (2) |
- Remove the 3 screws
which secure the front radio speaker (2) and bracket (1) assembly
to the door.
- Disconnect the front radio speaker electrical connector (3).
- Remove the front radio speaker (2) and bracket (1)
assembly from the vehicle.
- Peel and remove the front
side door water deflector (3) from the door (1).
- Inspect the water deflector (3) for holes. Use waterproof
tape in order to repair any holes found. Apply waterproof tape to both sides
of the water deflector (3), if necessary.
Installation Procedure
- Apply adhesive to the
back of the front side door water deflector (3).
- Install the water deflector (3) to the front side door (1).
- Connect the front radio
speaker electrical connector (3).
- Install the front radio speaker (2) and bracket (1)
assembly to the door. Secure the assembly with the 3 screws.
- Install the front side
door pull handle bracket (2) to the door (3). Secure the bracket
with the 2 screws (1).
- Install the front side door trim panel. Refer to
Front Side Door Trim Panel Replacement
.