Removal Procedure
- Remove the rear side door
trim panel. Refer to
Rear Side Door Trim Panel Replacement
.
- Remove the following components from the rear side door (3):
2.2. | The rear side door pull handle bracket |
- Peel the water deflector (2) from the door (3).
- Inspect the water deflector (2) for holes. Use waterproof
tape in order to repair any holes found. Apply waterproof tape to both sides
of the water deflector (2), if necessary.
Installation Procedure
- Apply adhesive to the
back of the rear side door water deflector (2).
- Install the water deflector (2) to the rear side door (3).
- Install the rear side door pull handle bracket to the door. Secure
the bracket with the 2 screws.
- Install the rear side door trim panel. Refer to
Rear Side Door Trim Panel Replacement
.