High Accelerator Pedal Effort (Replace Throttle Valve Control (TV) Cable)
| Subject: | High Accelerator Pedal Effort (Replace Throttle Valve Control (TV) Cable) |
| Models: | 1999-2000 Chevrolet Tracker |
| with Automatic Transmission (RPO M41) |
Condition
Some customers may comment on a higher than normal accelerator pedal effort.
Cause
This condition may be caused by the throttle valve control (TV) cable corroding within the casing resulting in binding of the cable.
Correction
A new TV cable, P/N 91175992, is available with a stainless steel material to prevent the corrosion.
Important: Be sure to install the stopper provided with the cable assembly to the inner cable. This stopper is the adjustment reference point.
Replace the cable following the service procedure in the Automatic Transmission sub-section of the Service Manual.
Parts Information
Part Number | Description |
|---|---|
91175992 | Cable Assembly, Throttle Valve Control |
Parts are currently available from GMSPO.
Warranty Information
For vehicles repaired under warranty, use:
Labor Operation | Description | Labor Time |
|---|---|---|
K6200 (2 WD) | Cable and/or O-Ring, Throttle Valve Control - Replace | 1.6 hrs* |
K6200 (4 WD) | Cable and/or O-Ring, Throttle Valve Control - Replace | 1.7 hrs* |
* This is updated from the current Labor Time Guide. The next update of the Labor Time Guide will contain this change. | ||
