- Remove the key from the
ignition switch.
- Install the yellow 2-way connector and install the CPA to the
inflatable restraint IP module pigtail (1).
- Close the IP compartment.
- Install the yellow 2-way connector (1) and install the CPA (2)
for the inflatable restraint steering wheel module and the steering wheel
side cap.
- Install the IP steering column opening trim plate. Refer to
Instrument Panel Trim Panel Replacement - Left Side
in Instrument Panel, Gauges and Console.
- Install the AIR BAG fuse (3) to the inline fuse holder.
- Staying well away from both air bags, turn the ignition switch
to the ON position. Verify that the AIR BAG warning indicator flashes seven
times and then stays OFF. If the AIR BAG warning indicator does not operate
as described, refer to
Diagnostic System Check - SIR
.