GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2001 🢒 Tracker - 4WD 🢒 Engine 🢒 Engine Mechanical - 2.0L 🢒 Crankshaft Front Oil Seal Replacement

Removal Procedure
  1. Remove the crankshaft pulley. Refer to Crankshaft Pulley Replacement .

    2. Important: To protect the crankshaft from damage, wrap the tip of the screwdriver with tape.


    Object Number: 517098 Size: SH
  2. Carefully pry out the crankshaft front oil seal using a screwdriver.

Installation Procedure

    Object Number: 517100 Size: SH
  1. Lubricate the new crankshaft front oil seal with Chassis Grease GM P/N 1051344 or equivalent.

    2. Important: Tap the oil seal in until its surface is flush with the crankshaft front oil seal retainer edge.

  2. Using a hammer and an appropriate driver, lightly tap the crankshaft front oil seal into place.
  3. Install the crankshaft pulley. Refer to Crankshaft Pulley Replacement .