GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2001 🢒 Tracker - 4WD 🢒 Brakes 🢒 Hydraulic Brakes 🢒 Rear Brake Hose Replacement

Removal Procedure
  1. Siphon brake fluid from the master cylinder reservoir.
  2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  3. Clean any dirt and foreign material from the hose and the fittings.
  4. Remove the rear brake hose from the right rear brake pipe.
  5. Remove the rear brake hose from the center brake pipe.

Installation Procedure
  1. Install the rear brake hose to the center brake pipe.
  2. Install the rear brake hose to the right rear brake pipe.
  3. Bleed the brake system.

    4. Refer to Hydraulic Brake System Bleeding .

  4. Lower the vehicle.