For 1990-2009 cars only
Removal Procedure
- Remove the brake pads (2, 3). Refer to Brake Pads Replacement .
- Remove the 2 brake pad retainers (4).
- Remove the 2 brake pad insulators (1).
Caution: Avoid taking the following actions when you service wheel brake parts:
• Do not grind brake linings. • Do not sand brake linings.
Some models or aftermarket brake parts may contain asbestos fibers which can
become airborne in dust. Breathing dust with asbestos fibers may cause serious bodily
harm. Use a water-dampened cloth in order to remove any dust on brake parts. Equipment
is available commercially in order to perform this washing function. These wet methods
prevent fibers from becoming airborne.
• Do not clean wheel brake parts with a dry brush or with compressed air.
Installation Procedure
- Install the 2 brake pad insulators (1) to the brake pads (3, 4).
- Install the 2 brake pad retainers (4).
- Install the 2 brake pads to the caliper. Refer to Brake Pads Replacement .
Important: Install the brake pad with the wear indicator to the inner pad position.
