GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2001 🢒 Tracker - 4WD 🢒 Steering 🢒 Power Steering System 🢒 Power Steering Pump Assemble

    Object Number: 462313 Size: SH
  1. Apply wheel bearing lubricant, GM P/N 1051344, (Canadian P/N 993037) or equivalent, to the oil seal lip.
  2. Apply DEXRON® - III Automatic Transmission Fluid, GM P/N 12346143, (Canadian P/N 10952622) or equivalent, to the sliding surface of the shaft (1).
  3. Insert the pulley's shaft from the oil seal side of the pump body (2).

    4. Object Number: 462320 Size: SH
  4. Apply DEXRON® - III Automatic Transmission Fluid, GM P/N 12346143, (Canadian P/N 10952622) or equivalent, to the O-rings and fit the O-rings (1,2) to the pump body.

    5. Object Number: 462518 Size: SH
  5. Install the side plate (1) to the pump body. Carefully align the dowel pins on the side plate with the bolt hole (2).

    6. Object Number: 462532 Size: SH
  6. Apply DEXRON® - III Automatic Transmission Fluid, GM P/N 12346143, (Canadian P/N 10952622) or equivalent, to the sliding surface of the rotor (2).
  7. Place the rotor with the dot (1) side facing upward. Install the rotor to the shaft (3).

    8. Important: Do not reuse old snap rings.

  8. Install a new snap ring to the shaft (3), fitting the snap ring securely into the shaft groove.

    9. Object Number: 462544 Size: SH
  9. Apply DEXRON® - III Automatic Transmission Fluid, GM P/N 12346143, (Canadian P/N 10952622) or equivalent, to the sliding surface of the cam ring (1).
  10. Install the cam ring to the pump body. Place the tapered end of the cam ring facing the side plate (2).

    11. Object Number: 462620 Size: SH
  11. Apply DEXRON® - III Automatic Transmission Fluid, GM P/N 12346143, (Canadian P/N 10952622) or equivalent, to each vane (2).
  12. Install 10 vanes to the rotor (1).
  13. Install the snap ring to the pump shaft.

    14. Object Number: 462652 Size: SH
  14. Apply DEXRON® - III Automatic Transmission Fluid, GM P/N 12346143, (Canadian P/N 10952622) or equivalent, to the O-ring (1).
  15. Install the O-ring to the pump body.

    16. Object Number: 462664 Size: SH
  16. Apply DEXRON® - III Automatic Transmission Fluid, GM P/N 12346143, (Canadian P/N 10952622) or equivalent, to the sliding surface of the pump cover (2) and the rotor.
  17. Match the dowel pins (3,4) to the holes of the cover plate and install the pump cover to the pump body.

    18. Object Number: 462670 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  18. Install 4 pump cover bolts (1,2,3,4) to the pump cover (5).

    19. Tighten
    Gradually tighten the pump cover bolts to 23 N·m (17 lb ft).


    Object Number: 462974 Size: SH
  19. Apply DEXRON® - III Automatic Transmission Fluid, GM P/N 12346143, (Canadian P/N 10952622) or equivalent, to the O-ring of the pressure switch (1).
  20. Install the pressure switch to the pump body (2).

    21. Tighten
    Tighten the pressure switch to 28 N·m (20 lb ft).


    Object Number: 462987 Size: SH
  21. Apply DEXRON® - III Automatic Transmission Fluid, GM P/N 12346143, (Canadian P/N 10952622) or equivalent, to the relief valve.
  22. Install the relief valve to the pump body (1).
  23. Install the flow control spring.
  24. Apply DEXRON® - III Automatic Transmission Fluid, GM P/N 12346143, (Canadian P/N 10952622) or equivalent, to the O-rings of the plug.
  25. Install the O-rings to the plug (2).

    26. Tighten
    Tighten the plug to 60 N·m (43.5 lb ft).


    Object Number: 462999 Size: SH
  26. Apply DEXRON® - III Automatic Transmission Fluid, GM P/N 12346143, (Canandian P/N 10952622) or equivalent, to the O-ring (2) of the suction connector (1).
  27. Install the O-ring to the suction connector.

    28. Object Number: 463005 Size: SH
  28. Install the power steering gear outlet hose connector (1) to the pump body (2).

    29. Tighten
    Tighten the power steering gear outlet hose connector bolts (3) to 10 N·m (88.5 lb in).

  29. Install the power steering pump to the vehicle. Refer to Power Steering Pump Replacement .