GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2003 🢒 Tracker - 4WD 🢒 Restraints 🢒 Seat Belts 🢒 Child Tether Anchor Bracket Replacement - Rear

Removal Procedure

    Object Number: 927873 Size: SH
  1. Open rear door.
  2. Pull back rear carpet (2).
  3. Remove the rear tether anchor cover (1).

    4. Object Number: 927881 Size: SH
  4. Remove the rear tether anchor bolts (1).
  5. Remove the rear tether anchor (2) from vehicle.

Installation Procedure

    Object Number: 927881 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  1. Install the rear tether anchor bracket (2) to the vehicle. Secure the rear tether anchor bracket (2) with the bolts (1).

    2. Tighten
    Tighten the rear tether anchor bracket bolts to 26 N·m (19 lb ft).


    Object Number: 927873 Size: SH
  2. Install the rear tether anchor bracket trim cover (1) to the rear tether anchor bracket.
  3. Pull carpet (2) back to its original position.
  4. Close rear door.