GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2003 🢒 Tracker - 4WD 🢒 Body and Accessories 🢒 Wiring Systems 🢒 Blower Motor Resistor Replacement

Removal Procedure

    Object Number: 467834 Size: SH
  1. Open the instrument panel (IP) compartment.
  2. Push in the left and right side of the IP compartment and lower the IP compartment.

    3. Object Number: 474194 Size: SH
  3. Disconnect the blower motor resistor electrical connector (2).
  4. Remove the screw from the blower case.
  5. Remove the blower motor resistor from the blower case.

Installation Procedure

    Object Number: 474194 Size: SH
  1. Install the blower motor resistor to the blower case.
  2. Secure the resistor with the screw.
  3. Connect the blower motor resistor electrical connector (2).
  4. Close the instrument panel compartment.