Dust Leaks for Chevrolet Tracker - 4WD 2003
Dust may leak into the vehicle where water will not. This
happens particularly in the lower portion of the interior.
Forward motion of the vehicle can create a slight vacuum which pulls
air and dust into the vehicle.
In order to determine the location of dust leaks, perform the following
steps:
- Remove the mats from the floor.
- Remove the mats from the kick panel.
- Remove the insulation from the floor.
- Remove the insulation from the kick panel.
- Drive the vehicle on a dusty road.
- Examine the interior.
Dust in the shape of a small cone or slit will usually be found at the
point of leakage.
- Mark the points of leakage.
- Shine bright lamps on the underside of the floor and the cowl.
Ensure that the interior is darkened when performing this step.
- Have an assistant mark any points inside of the vehicle for any
points where the light shines through.
| • | Inspect the weld joints. |
| • | Inspect the body mounts. |
- Seal any leaks with an air-drying, body-sealing compound.