For 1990-2009 cars only
Removal Procedure
- Remove the front side door inside handle (1). Refer to Front Side Door Inside Handle Replacement .
- Remove the outside rearview mirror opening cover (2).
- Remove the screw which secures the front side door pull handle (4).
- Use a cloth in order to pull off the snap ring which secures the front side door window regulator handle (1), if equipped.
- Remove the window regulator handle (1), if equipped.
- Remove the front side master window switch, if equipped. Refer to Power Accessory Switch Panel Replacement .
- Gently pry the front side door trim panel (3) from the front side door by disengaging the plastic retainers which secure the panel.
- Position the door trim panel (3) away from the door in order to gain access to the front side window switch electrical connector, if equipped.
- Disconnect the window switch electrical connector, if equipped.
- Remove the door trim panel (3) from the vehicle.
- Remove the front side window switch from the door trim panel (3) by releasing the 4 plastic retaining tabs, as needed.
Installation Procedure
- Install the front side window switch to the front side door trim panel (3), if removed. Ensure that the 4 plastic retaining tabs are fully engaged.
- Connect the front side window switch electrical connector, if equipped.
- Install the door trim panel (3) to the front side door. Ensure that the plastic retainers are fully engaged.
- Install the front side master window switch, if equipped. Refer to Power Accessory Switch Panel Replacement .
- Install the front side door window regulator handle snap ring (1) to the front side door window regulator handle (2), if equipped.
- Install the window regulator handle (2) to the door, if equipped.
- Install the screw which secures the front side door pull handle (4).
- Install the outside rearview mirror opening cover (2).
- Install the front side door inside handle (1). Refer to Front Side Door Inside Handle Replacement .
