Rear Side Door Window Regulator Replacement Without Power Windows

1. Remove the rear side door window. Refer to Rear Side Door Window Replacement .
2. Remove the 3 bolts (1) and the 3 nuts (2) which secure the front side door window regulator (5).
3. Remove the window regulator (5) through the large opening in the inner portion of the rear side door.

1. Apply a multipurpose grease to the specified points.




Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the rear side door window regulator (5) through the large opening in the inner portion of the rear side door. Secure the regulator to the door with the 3 bolts (1) and the 3 nuts (2).

Tighten
Tighten the rear side door window regulator bolts and nuts to 10 N·m (89 lb in).

3. Install the rear side door window. Refer to Rear Side Door Window Replacement .

Rear Side Door Window Regulator Replacement With Power Windows

1. Remove the rear side door window. Refer to Rear Side Door Window Replacement .
2. Remove the 3 plastic retainers which secure the rear side door window regulator wiring to the front side door.
3. Disconnect the rear side door window regulator electrical connector.
4. Remove the 6 nuts (1, 2) which secure the front side door window regulator (5).
5. Remove the window regulator (5) through the large opening in the inner portion of the rear side door.

1. Apply a multipurpose grease to the specified points.




Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the rear side door window regulator (5) through the large opening in the inner portion of the rear side door. Secure the regulator to the door with the 6 nuts (1, 2).

Tighten
Tighten the rear side door window regulator nuts to 10 N·m (89 lb in).

3. Connect the rear side door window regulator electrical connector.
4. Secure the rear side door window regulator wiring to the front side door with the 3 plastic retainers.
5. Install the rear side door window. Refer to Rear Side Door Window Replacement .