GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2004 🢒 TrailBlazer - 2WD 🢒 General Information 🢒 General Information 🢒 Front Floor Panel Carpet Replacement

Removal Procedure
  1. Remove the front bucket seats. Refer to Front Seat Replacement - Bucket in Seats.
  2. Remove the front door sill plates. Refer to Front Side Door Sill Plate Replacement .
  3. Remove the center pillar trim panels. Refer to Center Pillar Garnish Molding Replacement .
  4. Remove the floor console. Refer to Console Replacement in Instrument Panel, Gages and Console.
  5. Remove the floor console bracket. Refer to Floor Console Bracket Replacement in Instrument Panel, Gages and Console.

    6. Object Number: 739849 Size: SH
  6. Remove the carpet from the vehicle.

Installation Procedure

    Object Number: 739849 Size: SH

    Caution: In order to avoid personal injury or vehicle damage when you repair or replace the carpet, use the same thickness and material size as the original installation. Always return the carpet to the original location.

  1. Position the carpet to the floor panel.
  2. Feed the front edge of the carpet underneath the instrument panel.
  3. Align the holes in the carpet to the seat studs on the floor panel.
  4. Position the rear carpet over the edge of the front carpet.
  5. Install the floor console bracket. Refer to Floor Console Bracket Replacement in Instrument Panel, Gages and Console.
  6. Install the floor console Refer to Console Replacement in Instrument Panel, Gages and Console.
  7. Install the center pillar trim panels. Refer to Center Pillar Garnish Molding Replacement .
  8. Install the front door sill plates. Refer to Front Side Door Sill Plate Replacement .
  9. Install the front bucket seats. Refer to Front Seat Replacement - Bucket in Seats.