Removal Procedure
- Remove the screw head covers from the midgate
handle using a small flat-bladed tool.
- Remove the screws retaining the midgate handle to the midgate.
- Remove the midgate handle from the midgate.
Installation Procedure
- Install the midgate handle to the midgate.
Notice: Refer to Fastener Notice in the Preface section.
- Install the screws retaining the midgate handle to the midgate.
Tighten
Tighten the handle screws to 2.5 N·m
(22 lb in).
- Install the screw head covers to the midgate handle.