GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 TrailBlazer - 2WD 🢒 Body 🢒 Body Rear End 🢒 Midgate Window Channel Extension Bracket Replacement

Removal Procedure

    Object Number: 1204238 Size: SH
  1. Open the midgate.
  2. Remove the midgate weather strip. Refer to Midgate Window Weatherstrip Replacement .
  3. Remove the screw retaining the midgate window channel brackets to the body.
  4. Remove the midgate window channel brackets from the vehicle.

Installation Procedure

    Object Number: 1204238 Size: SH
  1. Install the midgate window channel brackets to the vehicle.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the screw retaining the window channel brackets to the body.

    3. Tighten
    Tighten the screws to 10 N·m (89 lb in).

  3. Install the midgate weatherstrip. Refer to Midgate Window Weatherstrip Replacement .
  4. Close the midgate.