Rear Window Wiper Motor Replacement XUV

1. Remove the wiper arm (3). Refer to Rear Window Wiper Arm Replacement .



2. Remove the weatherseal (2) from the wiper motor pivot shaft (3).
3. Remove the interior trim panel from the endgate. Refer to Endgate Trim Panel Replacement in Body Rear End.
4. Remove the rear endgate window. Refer to Endgate Window Replacement in Body Rear End.
5. Disconnect the wiper motor electrical connector.



6. Remove the bolts (2) and the nuts (1, 3) retaining the wiper motor (4) to the endgate.



7. Remove the wiper motor assembly (5) from the endgate.

1. Install the wiper motor (1) to the endgate (2).

Notice: Refer to Fastener Notice in the Preface section.

2. Install the 2 bolts retaining the motor to the endgate.

Tighten
Tighten the bolts to 8 N·m (71 lb in).

3. Install the nuts.

Tighten
Tighten the nuts to 8 N·m (71 lb in).

4. Connect the wiper motor electrical connector.
5. Install the rear endgate window. Refer to Endgate Window Replacement in Body Rear End.
6. Install the interior trim panel to the endgate. Refer to Endgate Trim Panel Replacement in Body Rear End.



7. Install the spacer (2) on the wiper motor pivot shaft (3).



8. Install the wiper arm (3). Refer to Rear Window Wiper Arm Replacement .
9. Inspect the rear wiper system.

Rear Window Wiper Motor Replacement TrailBlazer, Envoy

1. Remove the wiper arm. Refer to Rear Window Wiper Arm Replacement .
2. Remove the nut and spacer from the wiper motor shaft.
3. Remove the interior trim panel from the liftgate. Refer to Liftgate Trim Panel Replacement in Body Rear End.
4. Disconnect the wiper motor electrical connector.
5. Remove the 2 bolts retaining the wiper motor to the liftgate.
6. Remove the wiper motor.

1. Install the wiper motor.

Notice: Refer to Fastener Notice in the Preface section.

2. Install the 2 bolts retaining the motor to the liftgate.

Tighten
Tighten the bolts to 8 N·m (71 lb in).

3. Connect the wiper motor electrical connector.
4. Install the interior trim panel to the liftgate. Refer to Liftgate Trim Panel Replacement in Body Rear End.
5. Install the spacer and the nut on the wiper motor drive shaft.

Tighten
Tighten the nut to 8 N·m (71 lb in).

6. Install the wiper arm. Refer to Rear Window Wiper Arm Replacement .