Important: The following steps must be completed before using the symptom tables.
- Perform the
Diagnostic System Check - Vehicle
in Vehicle DTC Information before using the Symptom Tables in order to verify that all of the following are true:
| • | The control modules can communicate via the serial data link. |
- Review the system operation in order to familiarize yourself with the system functions. Refer to the following:
Visual/Physical Inspection
| • | Inspect for aftermarket devices which could affect the operation of the Instrument Cluster or Audible Warning Systems. Refer to
Checking Aftermarket Accessories
in Wiring Systems. |
| • | Inspect the easily accessible or visible system components for obvious damage or conditions which could cause the symptom. |
| • | Inspect the applicable reservoir for the proper fluid level related to the indicator or message. |
| • | Verify that the indicators work properly during the displays test. |
Intermittent
Faulty electrical connections or wiring may be the cause of intermittent conditions. Refer to
Testing for Intermittent Conditions and Poor Connections
in Wiring Systems.
Symptom List
Refer to a symptom diagnostic procedure from the following list in order to diagnose the symptom:
Gages
Indicators
Driver Information Center
Driver Information Center (DIC) Switch Inoperative
Instrument Cluster Dimming
Odometer
Odometer Trip/Reset Switch Inoperative
Audible Warning
