GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2006 🢒 TrailBlazer - 2WD 🢒 Driveline/Axle 🢒 Transfer Case - NVG 226-NP8 🢒 Front Drive Axle Actuator Replacement

Removal Procedure
  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the engine protection shield. Refer to Engine Protection Shield Replacement .
  3. Disconnect the electrical connector from the actuator assembly.

    4. Object Number: 756336 Size: SH
  4. Remove the actuator assembly bolts.
  5. Remove the actuator assembly.

Installation Procedure
  1. Install the actuator assembly.

    2. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 756336 Size: SH
  2. Install the actuator assembly bolts.

    3. Tighten
    Tighten the bolts to 6 N·m (53 lb in).

  3. Connect the electrical connector to the actuator assembly.
  4. Install the engine protection shield. Refer to Engine Protection Shield Replacement .
  5. Lower the vehicle.